I'm not entirely sure where you're looking that suggest that a charcoal cabin air filter is available for your vehicle, but unfortunately there isn't one.
The only filter we have for your 2003 Ford Ranger is the PTC Custom Fit Cabin Air Filter # 3513661, which has a white media particulate. view full answer...
For a drop-in air filter that fits your 2007 Chevy Duramax 6.6 diesel (new body style), we have the PTC Custom Fit Engine Air Filter - Light Duty # 351PA5314. view full answer...
The pre-filter for the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter # AR402-101 is found on our site with part # AR799-478.
You may also be interested in the Cleaning Solution # AR790-554 and the Airaid SynthaMax Universal Replacement Premium Air Filter # AR722-478 for in the future. view full answer...
Part # AR851-385 works for your 2019 Ford Expedition. This is a dry style filter so you won't have to worry about oiling it after cleaning the filter. This is also a reusable filter which means you just wash it out, let it dry, and reinstall the filter into your vehicles air box. view full answer...
The filter for your Atwood Air Command 15022 has been discontinued unfortunately. That being said, it may be a good opportunity to upgrade your unit.
If you're looking for a suggestion, the Advent Air RV Air Conditioner System - Single Zone # ADV64FR is a great choice and will work with both ducted and non-ducted systems, has 15K BTU capacity, and includes a wall mounted LED thermostat. view full answer...
You're looking for the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle # F42ZR, which is the Firestone part 2708 you were looking for and is a confirmed fit on your 2018 Ford F-350 Super Duty dually.
If you don't already have an on-board compressor system to keep your air bags filled from the comfort of your cabin, and give you the flexibility to adjust the air pressure on the fly, I recommend the Air Command II Compressor System # F2168. This is a dual path... view full answer...
Since you are needing a vent that sits above your shower you need one that doesn't have power. Roof vents that use electricity, like the MaxxFan Deluxe Roof Vent # MA00-05100K, aren't built to resist the water that would be filtering through if installed above a shower.
Because of this I recommend installing the Ventline Ventadome Trailer Roof Vent # V2092SP-28 which operates manually and fits a standard 14" x 14" vent opening. If you would like to leave the vent open when it is raining... view full answer...
Although we do not have a specific fit guide for RV or trailer vents, most of them typically use a 14 x 14 vent cover. We do have plenty of options when it comes to this size so you will just need to choose the option that has the correct hinge type.
For a 3-Point Hinge I recommend part # CAM40153
For a 4-Point Hinge I recommend part # CAM40154
For a Continuous Hinge I recommend part # BV0554-01
I am attaching a link to our selection of vent covers for you to filter through as well as... view full answer...
All of our transmission coolers are actually designed to be used in addition to your OEM cooler. For the 5.3L V8 on your 2015 GMC Yukon XL (excluding 323 c.i.) the best option we have is the Derale # D13503. These coolers aren't necessarily vehicle specific. You just need to make sure that you have enough room under your hood for it. This cooler measures # 11" wide x 8-3/4" tall x 7/8" deep. I have linked a helpful article on transmission coolers that you can reference for the best place... view full answer...
The two-piece vent assembly you referenced, part # HMAV2-AVT2 from Redline, includes an outer portion with perforations on its lower surface to allow hot air out while preventing rain from getting in. Four of these vents (or similar equivalents) seem like a suitable start for basic trailer ventilation so you are on the right track.
However, you may want to consider a roof vent. This will require some obvious cutting in your trailer and careful sealing of the vent (to prevent entry of rain)... view full answer...
There are a few things that you can do to help out your 2013 Ford Explorer for when you are towing. You can add an air intake system, a tuner, and also an aftermarket transmission cooler to get the most out of your Explorer. I do recommend getting your check engine light taken care of though as that is something you don't want on, especially when towing.
The best intake system that we have is the Airaid MXP Cold Air Intake System # AR400-260 which feature an oiled filter for superior engine... view full answer...
I can definitely help you out with a flat towing setup for your 2020 Buick Envision!
You can definitely use the Roadmaster Crossbar-Style Base Plate Kit # 523196-4 with the Adapter # RM-033 so that the base plate kit is compatible with a Blue Ox tow bar, but in all honesty it would be much easier to use the Roadmaster Direct-Connect Base Plate Kit # RM-523196-5 with the Adapter Kit # BX88185 instead because you don't have a whole bar that you need to use as an adapter.
I'm guessing that... view full answer...
The first thing that will increase your torque and horsepower is a cold air intake system like the Airaid # AR401-114. These don't have a specified amount of increase in those areas for your 2003 Ford F-250 but it is the thing to add. This will need to be cleaned periodically with the solution # AR790-554 and we also have replacement filters # AR701-445 if you ever need to replace yours.
The next thing you can add to boost your torque and horsepower is a performance tuner. I recommend... view full answer...
To use your Blue Ox Aventa LX BX7445 with the Demco Classic Base Plate Kit # DM9518193 you need the Adapter Kit # DM9523034. If you misplaced or need to replace the safety cables that came with your tow bar then you can use part # BX88197.
For a supplemental braking system that remains installed on your 2007 Hummer H3 I recommend the Air Force One # SM99243 for motorhome air brakes or the Stay-IN-Play DUO # SM99251 for motorhome hydraulic brakes. These are the best braking systems on the... view full answer...
Since you have such a heavy pickup I recommend using the Demco Classic Base Plate Kit # DM9518134 with the Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 which is rated for up to 10,500 lbs. I spoke with my contact at Demco who said that the Classic base plate kit should fit just fine as long as the commercial and snow build doesn't affect the tow hooks on your 2018 Ram 3500.
Then for wiring I recommend the Flexo-Coil Wiring Kit # RM-15267 because it stays permanently installed on... view full answer...
According to page 210 in the online version of the owner's manual for your 2007 Ford Edge the AWD version can be flat towed. You will want to refer to your copy of the owner's manual to confirm this and any other specific instructions when it comes to flat towing your vehicle.
A complete flat towing setup consists of a base plate kit, tow bar, safety cables, vehicle wiring, a supplemental braking system, and sometimes a high-low adapter. If you don't already have this equipment then I... view full answer...
For a complete flat towing setup on your 2019 Jeep Wrangler Unlimited Rubicon you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter.
Since you are looking at installing an aftermarket bumper that utilizes D-Rings you will need the Adapters # RM-035 for 3/4" Thick or # RM-035-1 for 1" Thick D-Ring mounts. These install directly onto a Roadmaster tow bar and take the place of a base plate kit. Just be... view full answer...
If the aftermarket bumper on your 2016 Jeep Wrangler has the 1 inch D-Ring bumper mounts, which it looks like it does, then you can use the Adapter for Jeep D-Ring Bumper Mounts # RM-035-1 which is compatible with the Roadmaster tow bar like the Sterling # RM-576. You can determine if these adapters are compatible by measuring the thickness of the D-Ring mounts. If they are 1 inch thick then these will work great!
A complete flat towing setup includes a Tow Bar, Base Plate Kit, Safety... view full answer...
The base plate kit that you want to install on your 2013 Chevrolet Equinox to use with the Nighthawk All Terrain # RM-676 is Roadmaster EZ5 # RM-523160-5. These will connect directly to each other without an adapter. This base plate kit will not fit your Equinox if it has a brush guard, but it does have a limited amount of trimming as you can see from figure T in the attached instructions.
To finish the wiring on your Equinox you need the Hy-Power Diode Wiring Kit # RM-152. Since a fuse... view full answer...
Thank you for all of the information! Trailers usually use 12V DC power but since it sounds like everything you have will operate using 110/120 AC power I recommend just going with AC power.
The first thing you need is a transfer switch so your electrical system knows where to pull power from (your generator or your shore power) and for this I recommend the Progressive Dynamics Transfer Switch # PD5110010Q.
Since you have a variety of electrical components I also recommend using the Progressive... view full answer...
Go To Results